
:: TR-FDD Series
Images (click thumbnail for larger image)
Key Features:
- » User changeable Channel Shields
- »
3 different channel selection sets available
- »
Transmit/Receive through one antenna
- »
FULL-DUPLEX
Overview:
Unlike traditional single radio solutions, where a single radio performs both transmitting and receiving in sequence, this high performance system utilizes two radios, allowing data to flow in both directions at the same time.
The unique design of this product allows for the use of interchangeable filters to adjust the units operation to meet changing needs and demands. With at least 65 Db of adjacent channel rejection, multiple radios can be collocated without an impact on performance.
These units support operation in 5, 10 and 20 MHz wide channels. Unlike some other solutions, the radio's filtering matches the channel size, meaning that the radio will only listen to the channels you want. Combined with Tranzeo's proven simple to install mounting system, and alignment LED's visible in full sunlight, this fully integrated unit offers a rugged, powerful solution at price that anyone can afford.
Important note: The distance ranges referenced below for the various radios/ &radio/antenna systems, are conservatively stated. Actual performance results may exceed (or occasionally be less) depending on a variety of factors including but not restricted to: (a) line of sight issues; (b) Fresnel zone issues; (c) towers heights (d) noise floors; and: (e) spectrum issues such as interference.
NEW HIGH POWERED MODEL ALSO AVAILABLE - SEE DETAILS BELOW.
Model Specifics:
TR-FDD-24 |
| RF Output |
Antenna Type |
Data Sheet |
Warranty* |
| 13 dBm TX / 13 dBm RX |
Integrated 24 dBi panel |
|
|
Description:
Integrated radio/antenna unit. Dealer must add choice of channel shield as per below. Price does not include channel shield. Point-to-Point backhaul application; appropriate for up to 5 miles for maximum throughput with up to 20 Mbps utilizing these units at both ends. This unit supports operation in 5, 10 or 20 MHz wide channels. The unique design of this product allows the use of interchangeable filters (Channel Shields) to adjust the unit's operation and to meet changing needs and demands. The TR-FDD-24 also allows for more data to travel through the same amount of radio spectrum with significantly less delay.
|
TR-FDD-24-GT |
| RF Output |
Antenna Type |
Data Sheet |
Warranty* |
| 26 dBm Tx / 26 dBm Rx |
Integrated 24 dBi Panel |
|
|
Description:
New Ultra High Powered Version of the TR-FDD-24 above. The 26dBm internally amplified power allows Full Duplex Point-to-Point connectivity up to 15 miles. Dealer must add choice of channel shield as per below. Price does not include channel shield.
This unit supports operation in 5, 10 or 20 MHz wide channels. The unique design of this product allows the use of interchangeable filters (Channel Shields) to adjust the unit's operation and to meet changing needs and demands.
Utilized in pairs. Simply rotate 90 degrees for Horizontal or Vertical polarity.
|
TR-FDD-26 |
| RF Output |
Antenna Type |
Data Sheet |
Warranty* |
| 13 dBm TX / 13 dBm RX |
26 dBi Parabolic Grid |
|
|
Description:
Complete system incorporating the radio product described above under TR-FDD-24. Dealer must add choice of channel shield as per below. Price does not include channel shield. Package consists of radio, 16"x12" Parabolic Grid antenna, 3 feet LMR 400 cable with N-Male connectors, TR-FDD-ACC1 accessory conversion kit, and all the mounting hardware. Should be matched with a similar system on the other end of this Point-to-Point application; appropriate for up to 9 miles for maximum throughput of up to 20 Mbps. The comparatively narrow 6 degree antenna beamwidth may assist with Fresnel zone issues.
|
TR-FDD-26-GT |
| RF Output |
Antenna Type |
Data Sheet |
Warranty* |
| 26 dBm Tx / 26 dBm Rx |
26 dBi Parabolic Grid |
|
|
Description:
Complete system incorporating the high powered radio product described above under TR-FDD-24-GT. Dealer must add choice of channel shield as per below. Price does not include channel shield. Package consists of radio, 16"x12" Parabolic Grid antenna, 3 feet LMR 400 cable with N-Male connectors, TR-FDD-ACC1 accessory conversion kit, and all the mounting hardware. Should be matched with a similar system on the other end of this Point-to-Point application; appropriate for up to 15 miles for maximum throughput of up to 20 Mbps. The comparatively narrow 6 degree antenna beamwidth may assist with Fresnel zone issues.
|
TR-FDD-29 |
| RF Output |
Antenna Type |
Data Sheet |
Warranty* |
| 13 dBm TX / 13 dBm RX |
29 dBi Parabolic Dish with Radome Cover |
|
|
Description:
Complete system incorporating the radio product described above under TR-FDD-24. Dealer must add choice of channel shield as per below. Price does not include channel shield. Package consists of radio, 2 foot Parabolic dish antenna, Radome cover, 3 feet LMR 400 cable with N-Male connectors, TR-FDD-ACC1 accessory conversion kit, and all mounting hardware. Should be matched with a similar system on the other end of this Point-to-Point application; appropriate for up to 15 miles for maximum throughput of up to 20 Mbps.
|
TR-FDD-29-GT |
| RF Output |
Antenna Type |
Data Sheet |
Warranty* |
| 26 dBm Tx / 26 dBm Rx |
29 dBi Parabolic Dish with Radome Cover |
|
|
Description:
Complete system incorporating the high powered radio product described above under TR-FDD-24-GT. Dealer must add choice of channel shield as per below. Price does not include channel shield. Package consists of radio, 2 foot Parabolic dish antenna, Radome cover, 3 feet LMR 400 cable with N-Male connectors, TR-FDD-ACC1 accessory conversion kit, and all mounting hardware. Should be matched with a similar system on the other end of this Point-to-Point application; appropriate for up to 29 miles for maximum throughput of up to 20 Mbps.
|
TR-FDD-32 |
| RF Output |
Antenna Type |
Data Sheet |
Warranty* |
| 13 dBm TX / 13 dBm RX |
32 dBi Parabolic Dish with Radome Cover |
|
|
Description:
Complete system incorporating the radio product described above under TR-FDD-24. Dealer must add choice of channel shield as per below. Price does not include channel shield. Package consists of radio, 3 foot Parabolic dish antenna, Radome cover, 3 feet LMR 400 cable with N-Male connectors, TR-FDD-ACC1 accessory conversion kit, and all mounting hardware. Should be matched with a similar system on the other end of this Point-to-Point application; appropriate for up to 25 miles for maximum throughput of up to 20 Mbps.
|
TR-FDD-32-GT |
| RF Output |
Antenna Type |
Data Sheet |
Warranty* |
| 26 dBm Tx / 26 dBm Rx |
32 dBi Parabolic Dish with Radome Cover |
|
|
Description:
Complete system incorporating the high powered radio product described above under TR-FDD-24-GT. Dealer must add choice of channel shield as per below. Price does not include channel shield. Package consists of radio, 3 foot Parabolic dish antenna, Radome cover, 3 feet LMR 400 cable with N-Male connectors, TR-FDD-ACC1 accessory conversion kit, and all mounting hardware. Should be matched with a similar system on the other end of this Point-to-Point application; appropriate for up to 38 miles for maximum throughput of up to 20 Mbps.
|
TR-FDD-ACC1 |
| RF Output |
Antenna Type |
Data Sheet |
Warranty* |
| N/A |
N/A |
N/A |
|
Description:
TR-FDD N-Connector accessory kit. This allows you to add another antenna of choice to the N-Connector and disconnect the internal 24 dBi panel antenna. Designed to be installed by dealer. Kit Includes: N-Connector mounting plate, right angle SMA to N-Connector cable, channel shield gasket, cork gasket, Channel Shield boot cover, mounting screws 3 ft. LMR-400 N-Male to N-Male cable.
|
TR-CS1 |
| RF Output |
Antenna Type |
Data Sheet |
Warranty* |
| N/A |
N/A |
|
|
Description:
5.8 GHz Channel Shield tuned to 5.745 GHz & 5.825 GHz. Dealer Installable, interchangeable for selecting appropriate channels. CS1 utilizes channels 149 & 165. Includes neoprene replacement gasket.
|
TR-CS2 |
| RF Output |
Antenna Type |
Data Sheet |
Warranty* |
| N/A |
N/A |
|
|
Description:
5.8 GHz Channel Shield tuned to 5.745 & 5.785 GHz. Dealer installable, interchangeable for selecting appropriate channels. CS2 utilizes channels 149 & 157. Includes neoprene replacement gasket.
|
TR-CS3 |
| RF Output |
Antenna Type |
Data Sheet |
Warranty* |
| N/A |
N/A |
|
|
Description:
5.8 GHz Channel Shield tuned to 5.765 GHz & 5.805 GHz. Dealer installable, interchangeable for selecting appropriate channels. CS3 utilizes channels 153 & 161. Includes neoprene replacement gasket.
|
* - For information regarding our Limited Warranty please see our Warranty Policy
** - 2 Year warranties only applies to radio product built after May 1st 2006
*** - 3 Year warranties only applies to radio product built after December 1st 2006
Copyright 2007 - Tranzeo Wireless Technologies Inc. All Rights Reserved